회원가입   회원찾기
  ID PW
 
  설치/초보
  시스템 관리
  네트워크
  어플리케이션
  기타
  이전 솔라리스 설치 관련
  이전 어플리케이션 관련
  이전 네트웍 관련
  이전 기타
 

   제 목 : ^^;;(원본입니다)
   작성자 : 이승건 날짜 : 2003-02-20
   분류 : 설치/초보 조회수 : 1986

Patch-ID# 104169-08
Keywords: Desktop Standalone Flash PROM Update
Synopsis: Hardware/PROM: Ultra 2 Standalone Flash PROM Update
Date: Mar/07/2000

Solaris Release: 2.5 2.5.1 2.6 7 8

SunOS Release: 5.5 5.5.1 5.6 5.7 5.8

Unbundled Product: Hardware/PROM

Unbundled Release: OBP_3.25.0,POST_3.3.8

Xref:

Topic:

Relevant Architectures: sparc
NOTE: This utility is *not* OS-dependent. The list of releases shown
under the \"Solaris Release\" and \"SunOS Release\" sections may not
be complete: The absence of a valid Solaris Release or SunOS
Release from the lists above does not preclude the installation
of this patch against the hardware.
NOTE:sun4u Ultra 2 only


BugId\'s fixed with this patch: 1229983 1244597 1246093 1252098 1257925 1262941
4004140 4011323 4011853 4018056 4018294 4023467 4024106 4028057 4041025 4076224
4088491 4091949 4115766 4116867 4119827 4129194 4145990 4174299 4200529 4203848
4256699 4310258

Changes incorporated in this version: 4310258 4174299 4200529 4256699

Patches accumulated and obsoleted by this patch:

Patches which conflict with this patch:

Patches required with this patch:

Obsoleted by:

Files included with this patch:

802-3233-20.ps,
README.104169-08,
flash-update-Ultra2-01
flash-update-Ultra2-02,
flash-update-Ultra2-03,
flash-update-Ultra2-04,
flash-update-Ultra2-05,
flash-update-Ultra2-06,
flash-update-Ultra2-07,
flash-update-Ultra2-08,
flash-update-Ultra2-09,
flash-update-Ultra2-latest,

Problem Description:

Bugid 4310258: Add support for DHCP.
Bugid 4174299: Terminal emulator package sequence ESC-[<n>E broken
Bugid 4200529: Resumes fail with message \"Cant open /platform/sun4u/cprboot\"
Bugid 4256699: Ultra 60s/450 mhz cpus fail jumpstart install even with OE CD
modification.
Bugid 4129194: IP addresses specified as arguments to \"boot net\" not read
correctly.
Bugid 4145990: audible bell on console doesn\'\'t work - Ctl G gives visible
bell.
Bugid 4004140: For MP systems, the .p0-status and .p1-status display the wrong
value for the MC.
Bugid 4203848: get POST output OK, when system output starts console shows
nothing (DTR/RTS bug fix).
Bugid 4091949: Flashprom updates for Sun4u systems may cause NVRAM contents to
change.
Bugid 4115766: POST: Looping Ecache RAM Cross-talk test results in FATAL RESET.
Bugid 4116867: POST: Returning from Board Level Test POST menu resulted in
FATAL RESET & errors.
Bugid 1262941: prom gives wrong unumber for simms.
Bugid 1252098: Booting from floppy disk now works.
Bugid 4011853: Adds reads after stores to flush e$ line.
Bugid 4011323: Increased FEPS timeout for auto-negotiation with Rev A PHY chip.
Bugid 1257925: In FCode32 \"within\" was aliased to \"l-between\" rather than
\"l-within\".
Bugid 1246093: OBP word \".exception\" incorrectly decodes description for
\"Spill\" in \"Other\" traps.
Bugid 4018056: Need to have timeout of 500 msec. for FEPS PHY rev A reset.
Bugid 1229983: Sending a brk during booting will cause random errors.
4119827: Add prom keymap support for Eastern European countries: Hungary,
Poland, Czech, Russian, Greek, Turkey, Latvia, Lithuania.
Bugid 4076224: Can\'\'t boot through net when connected to a Synoptics 28115
100Mb hub.
Bugid 4088491: Console escape sequence panics sun4u systems.
Bugid 1244597: L1/A after banner hangs with \"The selected input device has no
read routine\".
Bugid 4023467: Sending brk/L1-A during boot with kadb will get \"Mem Addr not
Aligned\" error.
Bugid 4024106: kadb :c often causes panics.
Bugid 4018294: Client-tte-handler not called for large addresses.
Bugid 4041025: Single-stepping over some sethi instructions is broken.
Bugid 4028057: sbus-probe-list has no options for on-board devices.

Patch Installation Instructions:
================================
Intro
-----
This README is intended for users who wish to upgrade the firmware
in their Ultra 2 system Flash PROM.
Summary of the Patch Installation Process:
------------------------------------------
The installation shall comprise of the following steps
1) Determine the system\'\'s current Flash PROM firmware revision.
2) Compare the current Flash PROM firmware revision with the available or
latest Flash PROM firmware revisions.
3) If the current Flash PROM firmware revision is lower than the latest
available firmware revision in this patch, then proceed to the next step.
If NOT, STOP: DO NOT CONTINUE.
4) Prepare the system for the Flash PROM update
5) Running the Flash PROM Utility
6) Verifying successful Flash PROM Update
7) Restoring the system
8) Resume operations
Patch Installation instructions (in detail):
============================================
The required steps are explained in greater detail below.
1) Determine the System\'\'s Current Firmware Revisions
-------------------------------------------------
While the OS is running the following command may be used to
determine the current system firmware revisions;
/usr/sbin/prtconf -V
or
/usr/platform/sun4u/sbin/prtdiag -v | grep OBP
The firmware revisions may also be determined from the PROM monitor\'\'s
\"ok\" prompt with the following command;
.version

2) Compare the current Flash PROM firmware revision with the available or
latest Flash PROM firmware revisions.
Compare the output of the OBP line in the \"prtdiag -v\" or \"prtconf -V\"
output. Find the revision number and compare with the revision on the
entries below that of the \"flash-update-Ultra2-latest\" line
Available Firmware Revisions
----------------------------
-01 flash-update-Ultra2-01
OBP: Sun Ultra 2 UPA/SBus 3.1 Version 2 created 1996/03/28 17:08
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.1.4 4/09/1996 03:23 PM
-02 flash-update-Ultra2-02
OBP: Sun Ultra 2 UPA/SBus 3.1.3 Version 3 created 1996/06/24 18:21
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.1.4 4/09/1996 03:23 PM
-03 flash-update-Ultra2-03
OBP: Sun Ultra 2 UPA/SBus 3.1.5 Version 5 created 1996/08/27 16:13
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.1.5 6/28/1996 11:54 AM
-04 flash-update-Ultra2-04
OBP: Sun Ultra 2 UPA/SBus 3.7 Version 0 created 1997/01/09 13:06
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.2.1 12/20/1996 3:01 PM
-05 flash-update-Ultra2-05
OBP: Sun Ultra 2 UPA/SBus 3.11 Version 2 created 1997/12/05 10:25
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.3.5 11/21/1997 6:00 PM
-06 flash-update-Ultra2-06
OBP: Sun Ultra 2 UPA/SBus 3.11 Version 2 created 1997/12/05 10:25
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.3.7 3/09/1998 02:14 PM
-07 flash-update-Ultra2-07
OBP: Sun Ultra 2 UPA/SBus 3.11 Version 2 created 1997/12/05 10:25
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.3.8 11/16/1998 1:42 PM
-08 flash-update-Ultra2-08
OBP: Sun Ultra 2 UPA/SBus 3.19 Version 0 created 1999/02/04 21:01
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.3.8 11/16/1998 1:42 PM
LATEST flash-update-Ultra2-09; flash-update-Ultra2-latest
OBP: Sun Ultra 2 UPA/SBus 3.25 Version 0 created 1999/12/03 11:35
POST:Sun Ultra Enterprise 2 FCS_POST, version SB3.3.8 11/16/1998 1:42 PM

3) Is the UPGRADE NECESSARY?
If the current Flash PROM revision matches the version numbers given under
the flash-update-Ultra2-latest line, then STOP Here. This UPGRADE IS NOT
NECESSARY.
If the current Flash PROM firmware revision is lower than the latest
firmware revision in this patch, then proceed to the next step.

4) Preparing the System
---------------------
Note: Please check the value of \'use-nvramrc\' before any OBP FW upgrade and
restore afterwards if necessary.

a) As root, copy the \"flash-update\" files from the directory containing the
patch to the root directory as follows:
# cp flash*latest /
# chmod 755 /flash-update*
In order to boot the binary, it must be located within the root
partition. If it is not already located within the root partition
then move it to /. If the binary is already located elsewhere
within the root partition then note the exact filepath so that the
binary can be booted later.
b) As root, exit the OS such that the system returns to the PROM\'\'s \"ok\"
prompt:
# halt
ok
c) Power off the system.
** CAUTION ** Do not attempt to access any part of the system hardware
with the system power still on!
d) Remove the system top cover. (If you are unsure how to do this then
consult your system \"Installation Guide\" or \"Service Manual\".)
e) Set J2003 to write enable at 2+3. Default is write protect at 1+2
Locate jumper J2003. NOTE that a plug-in card may be installed in
the system which covers J2003 - if this is the case then you will
have to remove the plug-in card in order to access J2003.
Jumper J2003 provides a write enable/disable mechanism for the
Flash PROM. J2003 normally connects pins 1+2, which causes the
Flash PROM to be write protected. To enable patch installation,
write enable the Flash PROM by MOVING the J2003 jumper from pins 1+2
to pins 2+3.
**IMPORTANT NOTE**: If this jumper is NOT set to WRITE ENABLE, the
Flash update will fail.
(If you have difficulty locating J2003 then consult Figure 1-2 in the
\"Sun Flash PROM Guide for Workstations and Workgroup Servers -
Standalone Version\").
If a plug-in card was removed to access J2003 in the step above
then reinstall the card now.
f) Replace the system top cover.

5) Running the Flash Update Utility
--------------------------------
a) Power on the system
Wait for the PROM\'\'s banner to appear, and then
b) use the Stop-A keys (or Break key, if running from a serial line) to
abort the auto-boot sequence.
** NOTE ** If the flash update completes normally then the values
contained within the system\'\'s Non-Volatile RAM (NVRAM) configuration
variables will be retained. However, if the update process is some-
how interrrupted then it is possible that any non-default values
contained in NVRAM will be lost. For this reason it is recommended
that you note down on paper the contents of any NVRAM configuration
variable which has been customized so that they may be manually
restored at a later time, if necessary. (Use the PROM\'\'s \"printenv\"
command to list the variables and their values.)
c) The system should now display the PROM monitor\'\'s \"ok\" prompt.
Now boot the Flash update utility as given below:
CAUTION: Do not boot/run revisions lower than the latest unless you
are absolutely sure that that is what you want to do!
ok boot disk /flash-update-Ultra2-latest
NOTE: If your system\'\'s boot device is not \"disk\" then you will
have to specify the appropriate devalias (e.g. disk2).
If the binary is located in a location other than / then
provide the entire filepath after the boot device.
Answer the questions as prompted by the utility.
+++++++++++++++++++++ example Flash update follows ++++++++++++++++++++++++
++++++++ Note that this is an example only. Much of the information ++++++
++++++++ which is displayed by your system will be different from ++++++
++++++++ what is shown below. ++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Standalone Flash PROM Update Utility, Rev. 2.4
Ultra(tm) 1
Ultra(tm) 2
Ultra(tm) 5/10
Ultra(tm) 30
Ultra(tm) 60 / E220R
Ultra(tm) 80 / E420R
Ultra(tm) Enterprise(tm) 250
Ultra(tm) Enterprise(tm) 450
This utility allows you to interactively update the firmware
revisions in specific system Flash PROM components.
Type h for help, q to quit, Return or Enter to continue:
Every precaution should be taken to prevent the loss of system
power during the Flash PROM programming process!
Type h for help, q to quit, Return or Enter to continue:
Firmware Release(s) Firmware Release(s)
Currently Existing in the System Available for Installation / Install?
---------------------------------- -------------------------------------------
OBP 3.1.2 1996/03/28 17:08 OBP 3.1.5 1996/08/27 16:13 no
POST 3.1.4 1996/04/09 03:23 POST 3.1.5 1996/06/28 11:54 no
Type sa if you wish to select all available firmware releases for
installation. Type h for help, quit to exit, or cont to continue: sa
Firmware Release(s) Firmware Release(s)
Currently Existing in the System Available for Installation / Install?
---------------------------------- -------------------------------------------
OBP 3.1.2 1996/03/28 17:08 OBP 3.1.5 1996/08/27 16:13 YES
POST 3.1.4 1996/04/09 03:23 POST 3.1.5 1996/06/28 11:54 YES
Type sa if you wish to select all available firmware releases for
installation. Type h for help, quit to exit, or cont to continue: cont
The Flash programming process is about to begin.
Type h for help, q to quit, Return or Enter to continue:
Erasing the top half of the Flash PROM.
Programming OBP into the top half of the Flash PROM.
Verifying OBP in the top half of the Flash PROM.
Erasing the bottom half of the Flash PROM.
Programming OBP into the bottom half of Flash PROM.
Verifying OBP in the bottom half of the Flash PROM.
Erasing the top half of the Flash PROM.
Programming POST into the top half of Flash PROM.
Verifying POST in the top half of the Flash PROM.
Programming was successful.
Resetting ...
Restoring previous NVRAM environment settings...
<If any NVRAM configuration variables have custom values installed then
you will see a list of the variables/values which are being restored.>
#power-cycles = 10
auto-boot? = false
security-#badlogins = 0
OK
Resetting ...
+++++++++++++++++++++ example Flash update ends ++++++++++++++++++++++++++
Once the PROM\'\'s banner reappears then use the Stop-A keys (or Break
key, if running from a serial line) to abort the auto-boot sequence
if the system begins to boot.

6) Verifying successful Flash PROM Update
Verify from the results of the .version command that the OBP
version matches the OBP version given above under the
flash-update-Ultra2-latest entry in Step 2.

7) Restoring the system
The system should be restored to the original set-up as follows:
a) Turn the power to the system off.
b) Remove the top cover and move jumper J2003 to pins 1+2.
c) Replace the top cover.
If any problems should be encountered during the firmware upgrade
then consult the \"Sun Flash PROM Guide for Workstations and Workgroup
Servers - Standalone Version\".

8) Resume operations
a) Turn on the system power and allow the system to boot the
operating system.
b) Once the system has rebooted you may wish to remove the Flash Update
binaries and documents since they will no longer be needed.
# rm /flash-update*
c) Remember to remove the files from their original location if
they were not extracted directly into the root directory.

Special Install Instructions:
-----------------------------
**************************************************************************
**************************************************************************
**WARNING:****WARNING:****WARNING:****WARNING:****WARNING:****WARNING:**
* PLEASE READ THE INSTRUCTIONS CAREFULLY AND ENTIRELY. PLEASE FOLLOW THE
INSTRUCTIONS EXACTLY AS THEY ARE STATED.
* FAILURE TO FOLLOW INSTRUCTIONS COULD EITHER RESULT IN A DEFECTIVE BOARD OR
UNSUCCESSFUL FLASH PROM UPDATE.
* THIS IS NOT A STANDARD PATCH in that it does not use the installpatch
and backoutpatch scripts.
* THIS PATCH CANNOT BE INSTALLED ON AN ONLINE OPERATING SYSTEM BECAUSE
THE INSTALL INSTRUCTIONS REQUIRES THAT THE SYSTEM BE BROUGHT DOWN.
BE SURE TO SCHEDULE DOWN TIME TO INSTALL THIS PATCH.
* INSTALLATION OF THIS PATCH REQUIRES A HARDWARE JUMPER CHANGE. IF YOU ARE
UNSURE ON HOW TO OPEN THE SYSTEM BOX, PLEASE ENSURE THAT A QUALIFIED
PERSON, WITH THE STATIC WRIST STRAP KIT NEEDED TO SERVICE ELECTRONIC
EQUIPMENT, IS AVAILABLE TO COMPLETE THIS ACTIVITY. FAILURE TO USE STATIC
PROTECTION KIT OR IMPROPER HANDLING COULD RESULT IN THE DAMAGE OF THE
SYSTEM BOARD.
* PLEASE REVIEW NOT ONLY THIS README BUT ALSO ADDITIONAL DOCUMENTATION
GIVEN.
The file \"802-3233-xx.ps\" where xx stands for the latest numeric
revision is a PostScript copy of the \"Sun Flash PROM Guide for Workstations
and Workgroup Servers - Standalone Version\", which provides the following;
(i) A board-level diagram that gives the approximate location of the
hardware jumpers (that will need to be changed).
(ii) Emergency instructions in the unlikely event that the Flash
update should fail.
Note, however, that the Flash PROM Guide is written for a user who is
running the Flash PROM update utility from a bootable CDROM, and thus
it will not contain the proper boot commands for installation of this
patch. Also note that the instructions in the document for installing
packages are not valid for this patch.
**WARNING:****WARNING:****WARNING:****WARNING:****WARNING:****WARNING:**
**************************************************************************
**************************************************************************

README -- Last modified date: Wednesday, November 7, 2001

[목록보기]  [출력]  


[ 관련글 보기 ]
번호 제목 작성자 등록일 조회수
1    메인보드 패치하는것 좀 가르쳐주세요...^^* 이석근 2003-02-18 1334
2    메인보드? 조호석 2003-02-19 1286
3       죄송합니다...^^* 이석근 2003-02-19 1311
4         ^^;;(원본입니다) 이승건 2003-02-20 1986
  사이트 소개  |  연락처  |  사이트 맵  |  이메일주소 무단 수집 거부 Copyright (c) 2020 Solaris School. All rights reserved.